Halifax update, September 2020

 

 

Dion Hanson

Now that we can begin working in Dean Clough again, be it with ‘social distancing’, the big clear up has started. Several collections arrived within weeks of each other and then with ‘lockdown’ they all had to be left where they were, which was in the main entrance. We are down to just three pallets left to go through.

pallets

 

We are looking at holding the delayed AGM at the end of October and it is vital from a health and safety point of view that the main entrance corridor is clear of pallets and equipment. Several machines which did not reflect British cinema installations have been moved on to other collections to make space for more relevant and important ones. Plus, duplicate machines have also been moved on but nothing ended up in a skip. Now we pay for storage we cannot take on more than we have space for, which used to happen in Bletchley. At least now anything we do have is not rotting away due to rain pouring in through the roof. Our problem is dust, where does it all come from? At least it does not damage projectors.

We recently acquired a display case which although too small for 35mm equipment, unless you put a splicer or some such in, proves a nice focal point for some narrow-gauge ephemera. Although we hold mostly 35mm equipment in Halifax we do have a large collection of 16mm films and some larger (pedestal type) 16mm projectors. However, we do have some 9.5mm and 8mm films and equipment which we use as talking points when at public exhibitions since many visitors remember the equipment their father or grandfather had to show family holidays on.

We have now almost completed our clear out and clean up in readiness for the crowds attending the up and coming AGM. It is always very difficult, when having to move some equipment on, but whenever we do we try and ensure that it is going to a good home and not some dealer who wants to move it on for a quick profit.

donation

 

Sometimes when we get a donation of a really good example of a machine that we already have we let the poorer example go. This way it saves us a lot of time with restoration, and if we keep the other machine (usually incomplete), we will strip it down for parts which often helps other members restore machines they are working on.

 

archive

 

archive

 

Archivist Tom has certainly had his work cut out in sorting and cataloguing all the books, manuals, and films but he looks to be getting his head above the pile of boxes as can be seen from the images.

Kalee

 

Allan and Jacob have been toiling with the pair of Kalees in the projection room and hopefully getting them to run as smoothly as they used to. The pair is made up of bits from all over the place and never ran in a cinema as one machine. A real scrapheap challenge for the guys but nice to rescue another Kalee set.

And, below, getting my car ready for a trip to Elstree.

Dion car

 

 

 

return